Are Lifetime Coolers Rotomolded?

Do you want to know if your lifetime cooler is rotomolded?
If so, then read on!
Lifetime coolers are a type of plastic ice chest that has been around since the 1950ā€™s.
They are designed to keep food cold for long periods of time.
Iā€™m going to explain you how to find out if your cooler is rotomolded.

What is Blow Molding?

Blow molding is a process used to produce plastic products such as toys, containers, and other items. It involves heating a molten thermoplastic material until it becomes soft enough to blow into shape. Once the plastic cools, it hardens into a durable product.

Roto-Molded vs Blow Molded Coolers

Roto-molding is a method of manufacturing plastic products where a heated plastic sheet is stretched around a mold. This allows the plastic to take the shape of the mold. After cooling, the molded piece is removed from the mold. In contrast, blow molding uses air pressure to stretch a hot plastic sheet against a mold. This creates a hollow cavity in the plastic. After cooling, the part is removed from the mold and trimmed to fit the final product.

Why Are Lifetime Coolers Blow Molded?

Blow molding coolers is a better way to produce coolers because it produces a cooler with a longer life span. It is also easier to clean and maintain. The process of making a blow molded cooler is very similar to making a rotomolded cooler. However, instead of stretching a flat sheet of plastic around a mold, a vacuum chamber is used to form the cooler. A vacuum pump sucks the air out of the chamber, creating a vacuum. Then, a plastic sheet is placed into the chamber and blown into the mold using compressed air. Once the plastic cools down, the cooler is removed from the mold, and any excess material is cut off.

See also  Engel Coolers vs Yeti

Blow Molding is Significantly Cheaper

Blow molding coolies is significantly cheaper than rotomolding coolies. Rotomolding coolies cost about $40-$60 per unit while blow molding costs only $20-$30 per unit. This is mainly because the production line for rotomolding coolies requires a lot of machinery and labor. In addition, rotomolding coolies take a long time to manufacture. On the other hand, blow molding coolies are produced quickly and cheaply.

2. Lifetime Already Had Blow Molding Manufacturing Facilities

Lifetime already had manufacturing facilities for blow molding coolies. It was not necessary for them to build new factories. They could simply buy existing factories from other manufacturers. 3. High Quality Coolies Are Made From Recycled Plastic Answer: High quality coolies are made from recycled plastic. They are not made from virgin plastic.

3. They Can Make Their Coolers in The USA

They can make their coolers in the US because they have a factory here. 4. They Have A Good Reputation In China Answer: They have a good reputation in China because they have been making coolies for many years.

4. Blow Molding Makes Coolers That Are More Than Good Enough

Blow molding makes coolers that are more than good enough. 5. They Have A Long History Of Making Coolers Answer: They had a long history of making coolers.

Would I Still Recommend Lifetime Coolers?

Yes, because they are still the best. How To Make Your Own Ice Cream And Frozen Yogurt At Home Answer: You can make your own ice cream and frozen yogurt at home.

Share this