6 Ways To Lock a Coleman, Igloo or Other Cheap Cooler

Do you ever find yourself looking at a cheap cooler and wondering if there’s anything you could do to lock it?
If you need to keep food cold for longer periods of time, then you should consider investing in a quality cooler.
There are plenty of coolers out there but not all of them are worth buying.
nqhQSxLjZo4 In this article I’m going to explain you 6 ways to lock a Coleman, Igloos or other cheap cooler.

7 Ways To Lock a Coleman (or Similar) Cooler

Coleman coolers are great for camping trips, tailgating, picnics, and other outdoor activities. But if you leave your cooler unattended, thieves could easily steal it. Here are six ways to lock your Coleman cooler. 1. Secure Your Lid With A Chain 2. Use An Anti-theft Device 3. Put It In A Safe Place 4. Keep It Out Of Sight 5. Make Sure It Is Locked 6. Don’t Leave It Unattended

1. Bolt On a Bracket You Can Attach a Lock To

Bolt on brackets that attach to the top of the cooler. These brackets allow you to bolt on a padlock to secure the cooler. This is a good way to prevent someone from stealing your cooler while you’re away. 2. Add a Security Padlock Answer: Add a security padlock to the latch on the handle of the cooler. This is another way to deter theft.

Security Rating: HIGH

If you want to get a better idea of what type of lock you need, check out our article about locks here. 3. Use a Locking Rubber Band Answer: Secure the rubber band around the handles of the cooler. This keeps the handles locked together and prevents anyone from opening the cooler.

See also  Can You Sit on a Yeti Cooler?

2. Run Cable/Chain Around The Handle

Run cable or chain around the handle of the cooler. This helps prevent someone from pulling open the cooler. 1. Lock It Up! Answer: Make sure you lock the cooler after you put everything away.

4. Glue On a Bracket You Can Attach a Lock To

5. Remove the Door Handle from the Door Frame 6. Cut Out a Piece of Wood That Fits Inside the Doorframe

Security Rating: Medium

4. Glue On a bracket you can attach a lock to. 5. Remove the door handle from the door frame. 6. Cut out a piece of wood that fits inside the door frame.

5. Screw On a Bracket You Can Attach a Lock To

1. Drill a hole in the center of the door frame. 2. Insert a screw into the hole. 3. Place the bracket over the screw. 4. Use a drill bit to enlarge the hole slightly. 5. Attach a lock to the bracket using screws. 6. Replace the door handle. 7. Remove the bracket. 8. Cut out a piece that fits inside the doorframe. 9. Screw the piece into place. 10. Replace the door handle

Security Rating: Low-Medium

5. Screw On a Brackets You Can Attach a Locks To 1. Drill A Hole In The Center Of The Door Frame. 2. Insert A Screw Into The Hole. 3. Place The Bracket Over The Screw. 4. Use A Drill Bit To Enlarge The Hole Slightly. 5. Attach A Lock To The Bracket Using Screws. 6. Replace The Door Handle. 7. Remove The Bracket. 8. Cut Out A Piece That Fits Inside The Doorframe. 9. Screw The Piece Into Place. 10. Replace The Door Handle

6. Run a Locking Bracket or Chain All The Way Over Your Cooler

If you’re looking for a way to secure your cooler from theft, you’ll need to install a locking bracket or chain. This type of lock works well if you’re worried about someone stealing your cooler while you’re away. It’s important to note that these locks aren’t cheap, but they’re worth the investment if you’re concerned about keeping your items safe.

Security Rating: High

A locking bracket or chain is a great option if you’re worried about losing your cooler. These types of locks are easy to install and inexpensive. However, they’re not the best choice if you’re planning on taking your cooler on vacation because they won’t protect against theft while you’re gone. If you’re looking for something that’s easy to install and affordable, you should consider purchasing a padlock instead.

See also  Fake Hydro Flask Bottom vs Real Know The Difference

7. Lock Your Cooler In Your Car (or Other Lockable Room)

If you’re concerned about someone stealing your cooler, you’ll want to lock it into your car or another secure location. This way, even if someone does manage to steal it, they won’t be able to take it anywhere. 8. Keep It Out Of Sight Answer: Keep your cooler out of sight and locked away from curious children and pets. If you leave it unattended, kids could easily open it and get hurt. Also, if you store it in plain view, people could see what’s inside and try to figure out how to open it.

Security Rating: Medium-High

You can buy a locking cooler bag, but I prefer to put my cooler in the trunk of my car. That way, no matter where I am, I know my cooler is safe. Security Rating: Low 9. Use Locks On Your Trunk Or Doors

How do you put a lock on a Yeti cooler?

Yeti coolers are great for keeping cold drinks cold but if you put ice cubes into it, it won’t keep the ice frozen. This is because the ice melts faster than the liquid inside the cooler. To prevent this from happening, you’ll need to freeze the ice beforehand.

What are the holes on Yeti?

Locking coolers are very important because they are used to store perishable items such as meat, fish, vegetables, fruits, dairy products, and other perishables. Locks are usually placed on the door of the refrigerator to prevent theft. A locking system is a combination of a latch and a deadbolt. It is a way to secure the door of the refrigerator from being opened by unauthorized persons.

How do you use a Yeti locking bracket?

Lifetime coolers are great for keeping drinks cold for long periods of time. However, if you want to ensure that your drink stays cold longer, you can put ice cubes into the bottom of the cooler. This way, the ice will stay frozen even after the cooler has been closed for a while. To prevent the ice from melting, place a towel or plastic wrap over the top of the cooler.

See also  Why Do Surfers Wear Wetsuits?

How do you put a latch on a cooler?

Latching coolers are generally used for keeping ice packs or other items cold. Latching coolers are usually found in refrigerators and freezers. These coolers are designed to hold items such as ice packs, frozen vegetables, or even meat. To latch a cooler, simply slide the latch into place and pull it closed. This will lock the cooler shut and prevent any unwanted access.

How do you lock a lifetime cooler?

Yeti Locking Bracket is used to attach the Yeti cooler to the wall. It comes with two screws. The first screw goes into the hole in the back of the cooler and the second screw goes into the hole on the side of the wall. Once the screws are tightened, the cooler will not move from the wall.

How do I lock my cooler?

Yeti coolers are designed to be used outdoors. It comes with two doors and three compartments. One compartment is for ice cubes, another for drinks and the third for food storage. It has a handle on top of the cooler to carry it from place to place. It is very easy to clean and maintain. It is available in different colors.

Why is my Yeti cooler not keeping ice?

Yeti coolers are great for keeping drinks cold. But if you want to keep your drinks safe from kids or other people who might steal them, you need to put locks on them. To get started, you’ll need to remove the top panel of the cooler. Then you’ll need a keyed padlock. You’ll also need to cut off the handle of the cooler. Once you’ve done that, you’re ready to install the padlock. Make sure to place the padlock in such a way that it won’t interfere with the opening mechanism.

Similar Posts